Tag: waterproofing

Mid Basement Project Progress

It’s about that time in the basement project where progress slows down, and it starts to lose its luster. This past weekend was a slog. It took all I had to muster up the courage for another two days worth of painting.

I adorned my battle gear (old boots, track pants and my work shirt) and grabbed my boom box & El Granto and headed into war.

The War against the spiders.

I’m a big, tough grown ass woman, but an eight legged arachnid will send me into a tizzy of screaming like a little girl and running away with my arms above my head.

The basement you see is home to an a colony of daddy long legs reminiscent of Aragog & his family from Harry Potter. They’re huge, mean and out to kill me. It’s true. They almost accomplished this feat by jumping out at me when I was painting the basement brick walls. They would crawl out from behind ductwork, or from behind the washer & dryer or (shudder) crawl out if the overflow drain on the sink. I even had one jump (I swear!) into my hair. Insert shrieking girl, hand waving freak out here.

All told I painted FOUR spiders into the wall, as my only weapon when they attacked me was my paintbrush. I stabbed countless others with the broom, a wire brush and a paint stirrer.

I love animals, but spiders you just don’t make the cut. They are horrible, horrible little creatures. They are almost as bad as those million legged house centipedes.

What else did we accomplish this weekend other than barely making a dent on the storefront spider population?

Painting. So much painting. When we left off last weekend we had painted the first coat of Behr Basement & Masonry Waterproofing paint on 3/4 of the laundry room brick walls. The reason only 3/4 of the walls got painted was the fact that we had to move the washer & dryer. We have a bunch of work to do with the washer & dryer, so once we removed them they would be gone for about a week. We left this until the last moment possible so that we could have clean underwear and socks. Those are vital luxuries I’m not willing to go without. So we washed every article of clothing and linens we owned, and removed the washer & dryer.

We have had two brand new Whirlpool laundry pedestals sitting in the boxes for (cough cough) two years. It was time to remedy that. So while I wire brushed and cleaned the walls, El Granto laid the washer & dryer on their backs and installed the pedestals.

El Granto tipping the dryer
El Granto tipping the dryer
The dryer laid on its back ready for its pedestal
The dryer laid on its back ready for its pedestal
Walls wire brushed to remove any loose paint (the grey marks are from my wire brush)
Walls wire brushed to remove any loose paint (the grey marks are from my wire brush)

With the washer & dryer in the middle of the room, I set to painting behind them. Like the rest of the walls I painstakingly brushed the first coat of paint ensuring I covered all the nooks and crannies.

We left it to dry overnight and yesterday I came back and rolled on a second coat throughout the laundry room. I used a long nap roller loaded with lots of paint and gave it a heavy coat, back brushing to ensure the paint covered well.

5 gallons of paint and 15 hours of work later, the basement waterproofing paint is done.

Basment Walls Painted with Behr Basement & Masonry Waterproofing paint
Basment Walls Painted with Behr Basement & Masonry Waterproofing paint

While I would love to show you a fantastic finished product, sadly that is not the case. The washer & dryer are still in the middle of the room, there is still dirt everywhere, the sink is full of (crap) and the floor is littered with paint cans and displaced tools.

Basement Progress
Basement Progress

Being mid project is like being in the eye of the storm.

Next up we need to get our Dricore subfloor down & leveled, re-do the dryer ducting & hook back up the washer & dryer. Install drywall (on some) of the walls, and then flooring, lighting, more paint, hiding the wires & plumbing, storage, curtains, pretty things and so much more.

Excuse me while I go wash the spider guts out of my hair.

Basement Step 1

We finally got started on our laundry room project, but before a paintbrush was lifted, we did a lot of research and prep. Basements are notorious for having problems with water (especially ones that are over 100 years-old). As the ad for Dricore told me at Home Depot, 98% of homes have basement water issues.

Basement before shot. Notice the evidence of the water that once entered the basement (from a blocked drain.)
Basement before shot. Notice the evidence of the water that once entered the basement (from a blocked drain.) and the dirt that came in with it.

Whether it’s a bit of condensation, dampness, or a basement floor that weeps when it rains, you probably have some sort of water hanging out in your basement. Before we could do anything with the basement we needed to get our water under control. We knew the water issue that occurred previously was from a blocked drain in the backyard. That has since been fixed, and the only water we’ve had in the basement since was a little puddle from the giant downpour we had this summer (remember the one with the flooded GO train and the abandoned Ferrari?) Even then the water puddled right beside the drain, and if our floor was sloped properly, it would have made it to the drain on it’s own. (We will be fixing the  floor slope as well.)

So our brick foundation is without active leaks, cracks and is generally in good repair. We have a working outdoor drain and two basement floor drains. We have a back flow valve that was installed in the basement floor, and all our broken clay pipes were replaced with PVC.

How else could water possibly get in? Dampness can come up through our cement floor, or in through our unsealed painted bricks.

So we needed to tackle both of these items. After much deliberation we opted to do a waterproofing paint on the walls and a Dricore subfloor on the floor.

Why did we opt to just waterproof paint the walls? Several reasons: we didn’t have active water, and the bricks had been painted in the past. To do an interior waterproofing system we would need to strip all the bricks (possibly causing damage) and then add an interior waterproofing membrane and French drain. Lots lots lots of work, and $.

So option B, waterproofing paint. There are several of these on the market, but only one that I could find which you could paint over existing (in good condition) paint; Behr Basement & Masonry Waterproofer. We are big fans of Behr paint (we’ve painted most of the house in it). So we feel confident in using the Behr product. While our work wouldn’t be warrantied (Behr only warranties it on unpainted brick). We felt confident that if we did proper prep and application we would be good to go!

Now it was time to prep. A paint job (especially of the waterproofing variety) is only as good as your prep work. So we moved everything away from the walls and got to work. We wire brushed the walls from top to bottom, removing any loose paint, and checking the mortar and brick for any problem areas.

Basement prep tools.
Basement prep tools.

We were happy with the state of our foundation (no cracks, or problem areas! YAY!) So we moved on to cleaning the bricks. We mixed up a solution of TSP and scrubbed the walls with TSP and a scrub brush, then washed off with clean water, and left everything to dry overnight.

Basement walls wire brushed, and washed with TSP
Basement walls wire brushed, and washed with TSP
Wall after wire brushing
Wall after wire brushing
Look how impressed (and sexy!) I look after wire brushing the basement.
Look how impressed (and sexy!) I look after wire brushing the basement.

The next day we came back and started applying our Behr Basement & Masonry Waterproofer in un-tinted white . We opted to use a long bristle brush to apply. This would end up being tedious, but ensured that we got the paint into every nook and cranny. We went over all the brick, one brick at a time ensuring we got good coverage with our waterproofing paint.

Painting the brick
Painting the brick
One coat of Behr Basement & Masonry Waterproofer painted
One coat of Behr Basement & Masonry Waterproofer applied

6 hours later and we completed one coat on about 3/4 of the walls in the laundry room. A lot of work, but the results are looking great so far!

I can’t wait to get back down there and finish painting. We have to move the washer & dryer to get to the rest of the basement. Hopefully we’ll have more progress to show you next week.