Master Bedroom Closet Part 2

*If you missed the first part of our closet makeover, check it out here*

When we moved into our house it had just been renovated. Great! That means brand new everything! However it’s not until you actually move in that you realize you have no curtains or curtain rods, no shower curtain rod or bathtub stop (so no way to bathe) no towel racks or toilet paper holders, and no closet rods.  In fact, there was nothing at all in any of the closets.  So we moved in, made a trip to the hardware store, and spent over $500 in blinds, curtain rods, towel bars and other crap that you don’t even think about! The closets got basic closet rods. This worked fine until our master closet had to be demo’d as part of the reno to fix our leaky house.

So when we moved back into the house after the reno, our closet was once again a (beige) empty shell.  However this time I was determined to make my dream closet and make the storage work for me. (Too bad that it didn’t get knocked off my to-do list until we’d been back in the house a year! oops)

Closet Before

Here’s what I wanted to accomplish in the closet:

  • Storage for full length dresses (including my wedding dress)
  • Double rods for shorter items such as shirts and pants
  • Shelving for sweaters and other bulky items
  • Organized Shoe storage
  • Boxes for less used items such as our snowboard gear & off season clothes
  • Accessories storage for scarves & handbags

So I set pen to paper and designed a closet that looked like this:

I then set out to find the pieces to my puzzle. I needed a vertical bookcase like structure, a shelf, three rods, some storage boxes, new hangers and some hooks for accessories.

Here are my supplies:

Ikea Expedit
Ikea Bumerang Hangers
Closet Rod Hardware (Home Depot)
Closet Rod (Home Depot)
Ikea Storage Boxes

Before I got started with my closet organization, I painted the closet dark grey as well as wallpapered & painted the insides of the closet doors to add some drama (and make all those white shelves & accessories pop!)

Painting Closet
Door Wallpapered & Closet Painted

Then we gathered our supplies.  Which involved a trip to Home Depot and Ikea.

Closet Rod & Flanges from Home Depot

Ikea without a car means a train ride, then an Ikea short bus shuttle to the store. Then we have to try to get our 6 foot tall, 55lbs new Expedit bookcase on the shuttle, on the train, then home (thank you El Granto aka the muscles in this operation.)

Ikea Purchases
El Granto on the Train with our Ikea Stuff

Once we got home we unpacked our things (or should I say Odin ate the packaging.)

Odin always has to have his paws in on the action

We assembled the Expedit and placed it in the closet.

Expedit Installed. Took 3 hours to buy it and get it home, and 10 minutes to build.

We spaced out where we wanted everything to go, and measured for our closet rods. We wanted two rods on the left, and one on the right for long dresses. To get the most bang for our buck I used my good friend math to optimize the 6′ closet rod in out 61″ closet. We cut the two longer rods to 28″ each and the shorter to 16″ using up the whole rod. We used masking tape to mark the rods for cutting and to protect them while we were wielding sharp blades around them.

Rod Cut Line Marked on Masking Tape

Then we headed out to the garage and cut the rods with a metal blade and our reciprocating saw (safety glasses and gloves are a must when cutting metal!)

Cutting the Closet Rods

Then we headed back inside, and attached the rod flanges to the wall and the Expedit. (They got screwed into the Expedit with the provided screws, and they were put into the wall with EZ Ancors.

 

Installing the Rod Flange
Rods Installed
Closet Installed

The shelf at the top should have been the next step, but I had trouble finding a shelf deep enough and long enough, so that project will have to wait another day. Now it was time to fill the closet.

Closet Finished!

SOURCE LIST:

Materials:
Expedit Shelving Unit – Ikea
Chrome Closet Rod – Home Depot
3 sets of Closet Flanges – Home Depot
E-Z Ancor’s – Home Depot
Martha Stewart Paintable Wallpaper in Pressed Tin – Canadian Tire
Behr Sample paint – Home Depot
Closet Wall Paint – Behr Premium Plus Ultra Eggshell in Cracked Pepper – Home Depot

Tools Used:
Level,
Drill
Wallpapering kit
Sharp Blade
Hammer & flat head screwdriver (for removing doors)
Paint Brushes & Trays

Difficulty Level (on a scale of 1-5):

Two out of five

Total Cost: $110 (Expedit $69, Door Makeover $20, Rods & Flanges $20)

Author: Kristen

Kristen & her husband El Granto & their Vizsla Odin live in a converted Storefront in downtown Toronto.

6 thoughts on “Master Bedroom Closet Part 2”

  1. OMG …let me tell you this is the best detailed tutorial I found :)thank you so much I was just confused with the closet rod part but now I am not .

    1. Nope! We just used the screws than came with the closet rod and screwed into the Expedit. It’s been a year and we have not had any problems with it!

Leave a Reply

Your email address will not be published. Required fields are marked *